Brother TN-350 Reset Procedure

There are two procedures for resetting the TN-350, depending on whether you have a print-only device (HL series) or multifunction device (MFC series).
Print-only Device (HL series):

If you have a Brother multi-function (HL series) machine and recently replaced your TN-350 toner cartridge, you can manually reset the toner remaining.
1.Delete any remaining jobs that may be in the Print Queue before replacing the Toner or Drum Unit
2.Turn off printer
3.Open front door and remove Drum and Toner Assembly
4.Remove Toner from Drum Unit
5.Replace Toner Cartridge (toner will not necessarily click and lock into Drum Unit)
6.Place drum and toner unit back into the machine
7.Turn on machine
8.Close the front door (Toner light should turn off)

Multi-function Device (DCP/MFC series):

If you have a Brother multi-function (DCP/MFC series) machine and recently replaced your TN-350 toner cartridge, you can manually reset the toner remaining
1. Open the door where the toner goes.
2. Press the ‘back’ button.
3. Press *00. (Do not respond to the query about the drum)
4. It should say accepted on the display screen
5. Close the door.

Close Menu
×
×

Cart